F - Formfeed - CAB A Series Programming Manual

PRODUCT MARKING AND BARCODE IDENTIFICATION

f - formfeed

This command feeds the media forward until the top-of-form of the next label reaches the printhead.
It does the same as pressing the FormFeed button on the printer´s control panel.
This process is controlled by the label photocell if die cut label material is used. The printer feeds the
material in continuous form mode in the lentgh which had been selected for the last printed label.
Syntax:
f CR
Example: f CR
f CR
feeds 2 labels
[TABLE OF CONTENTS] [COMMAND LIST]
cab Produkttechnik GmbH & Co KG
[ESC] [i] [L] [S]
53
This
function is
available
for:
A-series
Apollo
Hermes
M-series
[INDEX]
53