CAB A Series Programming Manual page 75

PRODUCT MARKING AND BARCODE IDENTIFICATION
B - Barcode Definition
[+options]
Depending on the barcode type, several options are available. Which option is
valid for which barcode is described for each barcode type on the next pages.
Following options are available:
[TABLE OF CONTENTS] [COMMAND LIST]
cab Produkttechnik GmbH & Co KG
+MODxx
offers the possibility to add a modulo check digit to a barcode
MOD10 adds a modulo 10 check digit
MOD11 adds a modulo 11 check digit
MOD43 adds a modulo 43 check digit
MOD16 adds a modulo 16 check digit
+WSarea
white space area - prints white zone markers for design purposes. The white
space size defines the quiet zone which is required for a good scanability
of the printed code.
+BARS
Prints boundary lines above and below the barcode.
+XHRI
(Extended Human Readable Interpretation) adds start - and stop characters
(*) for Code 39.
Adds start and stop boxes for Code 93.
Reduces the size of UPC-A and UPC-E(see details in the examples)
+NOCHECK
suppresses the check digit calculation for variable weight barcodes (EAN-13
and UPC-A with specific start numbers :21, 24...29)
+ELx
Error Level . sets the redundancy of a PDF 417 barcode. Valid values
for x = 0 to 8.
Barcode type DataMatrix can be printed as a rectangle or a square. The
default value is square. The +RECT option forces the printer to print this
barcode as a rectangle.
[ESC] [i] [L] [S]
75
This
function is
available
for:
A-series
Apollo
Hermes
M-series
[INDEX]
75