PRODUCT MARKING AND BARCODE IDENTIFICATION
z - print slashed / unslashed zero
The default setting for the zero character is unslashed. With this command the printer can be forced
to change the style of the zero character. It can be printed as 0 (unslashed) or Ø (slashed).
This command can only be used with internal bitmap - fonts. It is not available for internal vectorfonts
(Swiss, Monotype) or for truetype fonts: The selected method is valid for the complete label.
Syntax:
z t CR
Example:
z0
J
S l1;0,0,68,71,100
T 25,25,0,-3,x9,y9;1000
A1
Prints the number 1000 with slashed zeroes.
[TABLE OF CONTENTS] [COMMAND LIST]
cab Produkttechnik GmbH & Co KG
z = Select slashed zero
t = 0 - (zero - prints slashed zeros (Ø) )
t = O -(upper case letter O - prints unslashed zeros (0) )
[ESC] [i] [L] [S]
69
This
function is
available
for:
A-series
Apollo
Hermes
M-series
[INDEX]
69