S - Set Date/Time - CAB A Series Programming Manual

PRODUCT MARKING AND BARCODE IDENTIFICATION

s - set Date/Time

used to set date and time temporarily to be recalled on a label.
The printer´s internal clock chip and enables the user to recall time or date from the printer´s internal
clock. (A-Series and M-Series only - since firmware version 2.78 the time is also changed on the
printer´s internal real time clock)
This is useful when the printer is driven in "Stand Alone" mode, where no external data source is
available. (A-Series)
Syntax:
s n[ss] CR
Example:
s 031105091500
[TABLE OF CONTENTS] [COMMAND LIST]
cab Produkttechnik GmbH & Co KG
s = Set date / time command.
n= ASCII - string in following format to adjust date and time in the printer of
following format: YYMMDDhhmmss
YY
MM
DD
hh
mm
[ss]
Sets printer date and time to:
November 24, 2003 9:15 a.m.
[ESC] [i] [L] [S]
= Year - 2 digits
(values between 70 and 99 are interpreted as
1970-1999. Anything else is treated as year2000)
= Month. - 2 digits
= day - 2 digits
= hour - 2 digits
= minutes - 2 digits
= seconds - 2 digits
(setting of ss is optional)
63
This
function is
available
for:
A-series
Apollo
Hermes
M-series
[INDEX]
63