PRODUCT MARKING AND BARCODE IDENTIFICATION
M - Memory Card Access
The M commands defines the possibilities of memory card access. (The memory card is an optional
equipment).
This command is used to save and recall data on memory card, it is used to format the memory card
and erase data on memory card.
A memory card is normally used, if a printer runs iin "Stand Alone Mode" or together with the cab
database connector (described later in this manual).
The following pages will mention something which we call "IFFS". This is a special functionality
developed for some very special applications with very limited possibilities.
IFFS is not required for regular applications. This is only for your better understanding
M variations...
Syntax:
The "M" command is available in some variations which are described on the next pages.
[TABLE OF CONTENTS] [COMMAND LIST]
cab Produkttechnik GmbH & Co KG
[ESC] [i] [L] [S]
151
This
function is
available
for:
A-series
Apollo
Hermes
M-series
[INDEX]
151