PRODUCT MARKING AND BARCODE IDENTIFICATION
Direct cut
c - Direct cut
The c ommand forces the printer to cut immediately when it is received.
If required, the printer will do formfeed before the cut is processed.
This command is not available for the Hermes - Series.
Syntax:
c CR
The printer shows "Protocol error" on it´s display when no cutter is attached.
[TABLE OF CONTENTS] [COMMAND LIST]
48
[ESC] [i] [L] [S]
cab Produkttechnik GmbH & Co KG
48
This
function is
available
for:
A-series
Apollo
Hermes
no
M-series
[INDEX]