J - Job Start - CAB A Series Programming Manual

PRODUCT MARKING AND BARCODE IDENTIFICATION

J - Job Start

The J command "tells " the printer, that the following data contains label specific data. It starts a new
print job.
Syntax:
J [comment] CR
Example:
J Adress label
Defines the job start and names the label " Adress Label".
Adress Label will be displayed in the printer´s LC Display when the label is recalled from the optional
memory card.
[TABLE OF CONTENTS] [COMMAND LIST]
150
J = Job start command.
comment = Optional text which may describe the label. This optional text will be
displayed on the printers LC Display when it is recalled from the
optional memory card. Maximum length is 16 characters.
[ESC] [i] [L] [S]
cab Produkttechnik GmbH & Co KG
150
This
function is
available
for:
A-series
Apollo
Hermes
M-series
[INDEX]