M - Memory Card Access - CAB A Series Programming Manual

PRODUCT MARKING AND BARCODE IDENTIFICATION

M - Memory Card Access

The M commands defines the possibilities of memory card access. (The memory card is an optional
equipment).
This command is used to save and recall data on memory card, it is used to format the memory card
and erase data on memory card.
Syntax:
M variations...
The "M" command is available in some variations:
Syntax: Mc [pathname] CR
Memory card: content request
Requests the content of a directory path on the memory card (analog to the DOS command "DIR")
[pathname] is only supported on A-series and M-series printers
[pathname]=
* The internal flash file system can be setup through our resellers and it is made for special
applications.
Example:
Mc
Response from the printer:
Directory of 'A3/300
ARIAL
COMIX
MINSTREL
NORM101
COMPANY
BEDANO
NORM44
EXPLOSIV
NORM42
102
CDPLAYER
15807062 bytes free
[TABLE OF CONTENTS] [COMMAND LIST]
152
/card/ -recalls the card content of the optional
compact flash card
Leaving this option blank recalls automatically the
content of the Compact Flash Card.
/iffs/ -recalls the content of the internal flash file system
':
TTF 79804 20.05.04 14:37
TTF 66080 20.05.04 14:38
TTF 65692 20.05.04 14:39
LBL 1420 20.05.04 14:51
IMG 1012 20.05.04 14:41
TTF 83260 20.05.04 14:43
LBL 1530 20.05.04 14:43
IMG 2098 20.05.04 14:49
LBL 2104 20.05.04 14:49
LBL 1420 20.05.04 14:52
DBF 2858 08.06.04 13:03
[ESC] [i] [L] [S]
cab Produkttechnik GmbH & Co KG
152
This
function is
available
for:
A-series
Apollo
Hermes
M-series
[INDEX]