Table of Contents
Advertisement
PRODUCT MARKING AND BARCODE IDENTIFICATION
The picture below shows a test of the connection settings, where a Microsoft Access database is
connected.
Click on [Test Database Connection] to test the datasource.
If DatabaseConnector reports any errors in a popup, then install Jet40Sp3_Comp.exe and
mdac_typ.exe. (This is usually only required together with windows 98)
You can download this files at http://www.microsoft.com/data.
If DatabaseConnector reports - Connection open failed- in the list box, then something is wrong with
the connectionstring. Correct the connection string.
A sample printout which connects to a MS Access database is shown on the picture below.
Step3
Save the prepared label on the memory card of your A-series printer. A sample label is shown on the
next pages. Please note that this requires additional commands to get access to your database.
These additional commands are required:
The E-Command: (previously decribed in this manual )
Syntax:
E SQL;<IP of
Defines the IP adress of the computer where cab database Connector is installed. The portnumber
can be set in the database connector program its self and must be identicalto the port adress which is
set with the " E " command.
[TABLE OF CONTENTS] [COMMAND LIST]
234
cabDatabase connector>:Portnumber
[ESC] [i] [L] [S]
cab Produkttechnik GmbH & Co KG
234
This
function is
available
for:
A-series
Apollo
no
Hermes
no
M-series
no
[INDEX]
Advertisement
Table of Contents
