System Overview - Honeywell ESSER IQ8Control C Installation Instruction

Fire Alarm Control Panel IQ8Control C / M
13

System overview

The modular design with different micro modules and individual extension concepts allow the Fire Alarm
Computer IQ8Control C and IQ8Control M to be easily adapted to special requirements. This provides the range
from a stand-alone panel up to 31 Fire Alarm Control Panels Computer or other network subscribers such as
management system, Fire department indicator panel by using the essernet
The Field device modules required in order to configure a stand-alone FACP in accordance to the appropriate
standards and guidelines. The connections for the Fire Alarm Control Panel, the master box and the three freely
programmable relays are integrated on the Field device module. If several Fire Alarm Control Panels are
connected together in the essernet
Management system
Fire department
indicator panel
Fibre optical cable
LWL
Extinguishing control
computer 8010
Fig. 103: System overview
Additional extensions
The FACP panel configuration may be extended to suit requirements by adding supplementary input/ output
®
modules, esserbus transponders. Transponders may be installed at special integrated slots or on standard
C-Top rails in the housing. Optional plastic housings conforming to protection class IP 40 are available for the
decentralized installation of transponders on the loop.
124
® , the master box can be connected to one of the other FACPs.
LCD
display panel
MFAB
Serial
essernet -Interface
®
essernet
LWL
esserbus
Fire dept.
FDOP
key box
TAL
module
max. 1 km
®
max. 1 km
-PLus
®
®
safety network.
max. 1 km
Repeater
FB 798951.10.GB0 / 04.15