Honeywell ESSER IQ8Control C Installation Instruction page 46

Fire Alarm Control Panel IQ8Control C / M
6.3.5 Housing contact
Housing
open
V2
X7 X8
8 1
7 2
6 3
5 4
set
jumper
set
jumper
Fig. 37: Housing contact
The cover contact must be opened when the service PC is connected, otherwise the PC is not
recognised by the FACP.
46
Depending on the panel housing used, up to four cover contacts
can be connected to the connection terminals of the Basic module.
A single contact per housing is integrated by factory settings.
The opened housing contact is indicated by the illuminated LED
V2.
Connection of one housing contact
Connection of two housing contacts
Connection of three housing contacts
Connection of four housing contacts
FB 798951.10.GB0 / 04.15