Honeywell ESSER IQ8Control C Installation Instruction page 50

Fire Alarm Control Panel IQ8Control C / M
6.3.7 Micro module slot
Terminals (1-8) are provided at the micro module slot on the Basic module for connecting the freely selectable
micro module. Assignment of the eight screw terminals will depend on the micro module type used.
Fig. 42: Micro module slot, connection terminals and Location of Jumpers
All jumpers in horizontal position
X27 X28 X29 X30
All jumpers in vertical position
X27 X28 X29 X30
The micro module must be configured with the appropriate jumper and DIL-switches and additionally
programmed in the panels customer data.
50
X1
X27X28X29X30
X2 F1
X3
1 2 3 4 5 6 7 8
micro module
Required configuration for all micro modules apart from
essernet ® (factory setting)
EMC protection for this micro module connection terminal
is activated
Only required for essernet
The EMC protection is activated on the micro module for
essernet ® and therefore switched off on the
basic module.
® micro module.
FB 798951.10.GB0 / 04.15