Esserbus ® Transponder - Honeywell ESSER IQ8Control C Installation Instruction

18 esserbus ®
®
esserbus transponders are input/output modules for extending the control panel inputs/outputs. It is possible to
install up to 32 esserbus
operation of fire detectors and esserbus
The esserbus ® transponders is installed either at special fitting locations or with the top hat rail mounting kit
(Part No. 788652) in the Fire Alarm Control Panel, or at decentralised level at any location in a special plastic
housing (e.g. Part No. 788600).
For additional information refer to the Product catalogue fire and documentation of the esserbus
transponder.
For esserbus
transponders or devices with the Part No. 80xxxx (see Chapter 5.1.2).
FB 798951.10.GB0 / 04.15
transponder
® transponders in separate detector zones (separated by zone isolators). Mixing the
® transponders is not permissible within one detector zone.
®
PLus loops with a loop voltage of 42 V it is required to connect the appropriate
Fire Alarm Control Panel IQ8Control C / M
®
129