MDI-4000 Series Serial Interface Manual
2. Follow the instructions to configure batch reading settings for up to 4 barcodes. To
configure additional settings, contact your local Opticon Representative.
9 Indicator Options
You can configure options for the Buzzer and Good Read LED.
9.1 Buzzer
The scan engine provides feedback through these buzzer indicators:
•
Good read
•
Startup
•
Read timeout
•
Intermediate
The BUZZERn signal controls the buzzer tone and sound pressure with the pulse-width
modulation (PWM) signal.
9.1.1
Buzzer Volume
Buzzer volume settings are applied to all buzzers.
Buzzer Volume Commands
Command
T0
T1
T2
T3
98
Buzzer Loudness
Maximum
Loud
Normal
Minimum
Default
✓