10.3. Default Settings 2: Read Options, Trigger, Buzzer
Setting the number of characters
Read mode
Multiple read reset time
Redundancy
Trigger switch
Read time
Buzzer duration
Buzzer tone
Buzzer loudness
Indicator duration
11. Serial Number
The serial number shown below is affixed to the scanner.
Item
Figure 28: Serial number diagram
31
Default Setting
Fixed length OFF all codes (except for the
first digit of Industrial2of5, NW-7 or Code 39
and first 2 digits of Interleaved2of5)
Multiple read
500 ms
2 times
RS-232C: Enabled; USB/Wedge: Disabled
2 seconds (Trigger enable mode only)
200 ms
3 kHz + 2.5 kHz
Maximum
200 ms
Opticon
NFT 2200
Specifications Manual