Ac Adaptor; Operating Indicators; Led Indicator And Buzzer - Opticon OPI 4002 Specification Manual

5.3. AC Adaptor

The OPI 4002 can be charged by an optional AC adapter of 6.0 V / 750 mA. This optional
adapter is used for charging the internal battery.
Conditions
Connect 1Ω resistance to a power supply line in series and measure the current by
the voltage between both ends of resistance.
Power supply voltage is measured at a connector terminal area.
The current value depends on the interface type and host computer to which the
device is connected.

5.4. Operating Indicators

LED Indicator and Buzzer

5.4.1.
The OPI 4002 uses LEDs and a buzzer to indicate its status.
State
Charging
Scanning
Wireless
Connection
Color Display
Shows that the scanner is being
Red Lighting
The light changes from red to green
Green Lighting
when charging is completed.
Shows that the scan or transmission was
Green Blinking
Shows that the data could not be
Red Blinking
Shows that the data is being stored in
Orange Blinking
Shows that registration was completed.
Green Lighting
Red Lighting Shows that registration failed.
9
Specifications Manual
Operating State
charged.
executed normally.
transmitted.
memory.
Opticon
OPI 4002
Buzzer
-
-
Trrr
Pip, Pip, Pip
Trrrrrrrrrrr
Peeeeeeeeep
(Completion of
Registration)
Pip, Pip, Pip