How To Configure The Scan Engine With A 2D Menu Barcode; Figure 10: Creating 1D Menu Barcodes With Opticon's "Universalconfig - Opticon MDI-4000 Series Serial Interface Manual

MDI-4000 Series Serial Interface Manual
You can use Opticon's "UniversalConfig" to create the 1D menu barcodes. For help, contact
your Opticon Sales Representative.

Figure 10: Creating 1D Menu Barcodes with Opticon's "UniversalConfig."

3.7 How to Configure the Scan Engine with a 2D Menu Barcode

A 2D menu barcode can contain multiple settings that are processed in order in a single
operation. So, you can configure multiple settings for the scan engine by reading a single 2D
menu barcode. Scanning a 2D menu barcode automatically saves setting, so you do not need
to include a Z2 command.
A 2D menu barcode is a QR Code with this data:
@MENU_OPTO@ZZ@MenuCommand 1@MenuCommand 2@ZZ@OTPO_UNEM@
"@MENU_OPTO"
"@"
"ZZ"
"@"
"Any menu command"
"@"
"ZZ"
"@"
"OTPO_UNEM@"
18
(Start key)
(Separator)
(Start Menu)
(Separator)
(for example, U2)
(Separator)
(END menu)
(Separator)
(Stop key)
Print
← Multiple sets allowed