Page 1
Fixed Position 2D Imager Scanner NLV- 3101- HD:High Density type This manual provides specifications for the NLV- Specifications Manual 3101-HD fixed position 2D imager scanner.
Unless otherwise agreed in a written contract, all Opticon products are warranted against defects in materials and workmanship for two years after purchase. Opticon will repair or, at its option, replace products that are defective in materials or workmanship with proper use during the warranty period. Opticon is not liable for damages caused by modifications made by a customer.
Page 3
NLV- 3101- HD Specifications Manual Specification No. : SS12028 Product name : NLV-3101-HD Edition Date Page Section Description of Changes First 2012/10/15 Initial release Second 2012.11.02 Minor text corrections throughout Added US measurements to barcode resolutions where found throughout Convert term "Loose End" to "Flying Lead"...
This manual provides specifications for the NLV-3101-HD (High Density) fixed position 2D imager scanner. 2. Overview The NLV-3101-HD is a fixed position 2D imager scanner that enables high speed scanning of high resolution linear (1D) and 2D symbologies at close range.
Page 8
NLV- 3101- HD Specifications Manual Item Specification Note PDF417, MicroPDF417, Codablock F, QR Disable Code 128 Code , Micro QR Code, DataMatrix (ECC 0 - Symbologies when Codablock F is 140 / ECC 200), MaxiCode (Modes 2 to 5), enabled. Aztec Code, Chinese Sensible Code PDF417 : 5 mils (0.127 mm)
Page 9
NLV- 3101- HD Specifications Manual Item Specification Note This scanner is an Exempt Risk Group LED product. Peak Wavelength: LED safety IEC 62471:2006 Exempt Risk Group 624 nm For residential, commercial and light- EMI/RFI VCCI / EN55022 / FCC Class-B industrial environments Product safety...
NLV- 3101- HD Specifications Manual 4. Detailed View Figure 1: Detailed View of NLV-3101 Description Name By pressing this key, the scanner starts taking an image from the scanning Trigger Key window and LED illumination is emitted to read 1D/2D codes. Light paths of the imager, LED illumination and LED aiming.
NLV- 3101- HD Specifications Manual 5. Electrical Specifications 5.1. AC Adapter Specifications For RS-232C (D-Sub 9pin) and Wedge PS/2 models Input Specifications 5.1.1. Power supply voltage : AC 90 ~ 265 V Power supply frequency : 47 ~ 63 Hz Maximum current : 0.5 A (max) Output Specifications...
NLV- 3101- HD Specifications Manual 6. Interface Specifications The NLV-3101 supports four types of interfaces; RS-232C, USB-HID, USB-COM and Wedge PS/2. 6.1. RS-232C The RS-232C interface has two specifications for connecting to the host: D-Sub9pin with DC jack and flying lead (10 wires) with sequencer signals. Communication Setting Baud rate : 300 ~ 115200 bps...
NLV- 3101- HD Specifications Manual Flying Lead 6.1.2. 6.1.2.1. Pin Assignment Signal Name Cable Color Note Power-supply voltage: 4.5 ~ 5.5 V (Typ. 5 V) Trigger Brown External trigger input terminal Yellow External OK output terminal Orange External NG output terminal S-GND Black Gray...
Page 16
NLV- 3101- HD Specifications Manual 6.1.2.3. RS-232C Flying Lead Interface Cable Weight: approx. 45 g unit: mm Figure 6: Cable (RS-232C Flying Lead)
NLV- 3101- HD Specifications Manual 6.2. The USB interface models have two specifications: HID (Human Interface Device Class) and COM (Communication Device Class). With USB-COM model, VCP (Virtual Communication Port) allows virtual serial communication and the commands can be transmitted from the host computer. * Multi byte character data or images can be transmitted via USB-COM interface.
NLV- 3101- HD Specifications Manual USB Interface Cable 6.2.4. Weight: approx. 70 g unit: mm Figure 9: Cable (USB) 6.3. Wedge PS/2 How to Connect 6.3.1. ・Connect the branch cable (without label on, 6-pin Mini-DIN female) to the NLV-3101 Wedge interface cable connector (6-pin Mini-DIN male). ・Connect the branch cable connector (6-Pin Mini-DIN male) to the host keyboard connector.
NLV- 3101- HD Specifications Manual Pin Assignment 6.3.3. Wedge PS/2 Branch Cable Pin No. Signal Name KEY DATA KEY CLK Pin No. Signal Name CPU DATA CPU CLK Wedge PS/2 Interface Cable for the NLV-3101 Pin No. Signal Name CPU DATA KEY DATA CPU CLK KEY CKL...
NLV- 3101- HD Specifications Manual Wedge PS/2 Interface Cable 6.3.4. Weight: approx. 75 g unit: mm Figure 11: Cable (Wedge PS/2) Wedge PS/2 Branch Cable 6.3.5. Weight: approx. 25 g This cable is required when connecting both the scanner and the keyboard to the host. unit: mm Figure 12: Branch Cable (Wedge PS/2)
NLV- 3101- HD Specifications Manual 7.2. Aiming Pattern The aiming is used for the following purpose: 1. Fill light to recognize the appropriate reading range. 2. Fill light when auto trigger is used. The aiming specifications are as follows: - An optical axis of imaging field of view and the center of horizontal aiming width coincide at a distance of L=105±20 mm from the front edge of the scanner.
NLV- 3101- HD Specifications Manual 8. Technical Specifications Aim the laser light at the center of a code to scan it. For long distance scanning, ambient light entering the angle of view may affect the scanning performance. The conditions for technical specifications are as follows, unless otherwise specified in each section.
NLV- 3101- HD Specifications Manual 8.2. Scan Area and Depth of Field The scan area is measured from the front edge of the scanner. 0.127(5mil) [ Unit : mm ] Code 39 0.254(10mil) 0.18(7.1mil) Code 128 0.33(13mil) UPC 100% 0.127(5mil) PDF417 0.254(10mil) 0.169(6.7mil)
NLV- 3101- HD Specifications Manual 8.3. Printed Contrast Signal (PCS) 0.3 or higher <Conditions> : 32% and higher (70% or higher reflectivity of space and quiet zone) Distance : 65 mm from the front edge of the scanner Bar Code Sample : UPC specified in Chapter 8.
NLV- 3101- HD Specifications Manual 8.6. Pitch, Skew and Tilt Pitch : α = ±50° Skew : β = ±50° Tilt : γ = ±180° <Conditions> Bar Code Sample : 0.33 mm UPC specified in Chapter 8.1 Distance : 65 mm from the front edge of the scanner Curvature : R = ∞...
NLV- 3101- HD Specifications Manual 8.8. Auto Trigger The scanner starts scanning automatically when it detects a change in brightness that occurs when a bar code label is presented in front of it. Trigger should be enabled when inserting a gray-colored paper on a black backing paper. Trigger also should be enabled when inserting a black-colored paper on a gray backing paper.
NLV- 3101- HD Specifications Manual 9. Environmental Specifications 9.1. Temperature Scanning performance is guaranteed when the range of ambient temperature around the scanner is the following values: Operating Temperature : -20 ~ 50 °C Storage Temperature : -20 ~ 60 °C <Conditions>...
NLV- 3101- HD Specifications Manual 9.3. Ambient Light Immunity Scanning performance is guaranteed when the range of illumination on a barcode surface is between zero and the following values: Incandescent light : 10,000 lux Fluorescent light : 10,000 lux Sunlight : 100,000 lux <Conditions>...
NLV- 3101- HD Specifications Manual 9.5. Cable Strength There shall be no sign of malfunction after the following cable strength test. Cable Strength Test: Affix the scanner to an immovable object and pull it using a force of 24.5 N (2.5 kgf static loading) for 1 second.
NLV- 3101- HD Specifications Manual 9.9. Drop Impact Strength (without packaging) There shall be no sign of malfunction after the following drop test. Drop test: Drop the scanner three times (15 times in total), at each 5 face, from a height of 75 cm onto a concrete floor as shown below.
NLV- 3101- HD Specifications Manual 10. Regulatory Compliance 10.1. LED Safety IIEC 62471:2006 Exempt Risk Group 10.2. EMC EN55022 EN55024 FCC Part 15 Subpart B Class B This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: ( 1 ) this device may not cause harmful Interference, and ( 2 ) this device must accept any interference received, including interference that may cause undesired operation.
NLV- 3101- HD Specifications Manual 12. Reliability MTBF (Mean Time Between Failures) 50,000 hours Note: The reliability of the NLV-3101 is guaranteed as far as it is operated under normal operating conditions in the range of advised operating temperature and without excessive electrical or mechanical shock. 13.
NLV- 3101- HD Specifications Manual 14. Product Label The product label is affixed to the scanner as shown below. Figure 23: Product Label Position Serial number Figure 24: Enlarged View of Label...
NLV- 3101- HD Specifications Manual 15.2. Collective Packaging 30 units with AC adapter package size : 600 x 525 x 290 (WDH mm) 50 units without AC adapter package size : 600 x 525 x 250 (WDH mm) Figure 27: Collective Packaging (with AC adapter RS-232C (D-Sub 9pin) - example) Note: ʻRo markʼ...
NLV- 3101- HD Specifications Manual 17. Default Setting 17.1. Default Setting Menu Code The NLV-3101 is set to default settings by reading the following menu label regardless of the interface types. Default @ M E N U_ O P T O @ Z Z @ B A P @ Z Z @ O T P O _U N E M @ 17.2.
NLV- 3101- HD Specifications Manual 17.3. Other Default Item Default Setting Read mode Single read Extended read time Disable Beeper duration 100 ms Beeper tone 2.7 kHz Startup beeper Enable Beeper loudness Max (100%) Beeper timing Before data transmission Good read LED indicator duration 200 ms Data buffering Buffered mode...
NLV- 3101- HD Specifications Manual 17.5. USB-COM It is necessary to install OPTOELECTRONICS USB Driver to a host. Item Description Baud rate USB2.0 Full Speed Power supply 500 mA Vender ID 065A Product ID A002 Microsoft Windows 2000 / XP/ Vista / 7 Supported OS (32/64 bit) Standards...
NLV- 3101- HD Specifications Manual 18. Accessories 18.1. AC Adapter Specifications The NLV-3101 with RS-232C and Wedge PS/2 interfaces are shipped with a dedicated AC adapter “Universal AC Adapter Kit.” Plug connectors can be changed for each region. Refer to 18.2 for the detailed view.