Auto Trigger; Auto Trigger Modes - Opticon MDI-4000 Series Serial Interface Manual

MDI-4000 Series Serial Interface Manual
Example for Trigger Repeat Synchronized with Read Time:
"While trigger is pressed"
Example for Trigger Repeat with Read Time set to 1 second or more:
"While trigger is pressed"

8.3 Auto Trigger

When auto trigger is enabled, the scan engine automatically detects and reads barcodes.
8.3.1

Auto Trigger Modes

You can configure these two auto trigger modes:
•
Presentation auto trigger mode: Use this mode when the scan engine is in a fixed
position and barcodes are presented to the scan engine.
•
Handheld auto trigger mode: Use this mode when the scan engine is not in a fixed
position.
Auto Trigger Mode Commands
Command Description
+F Disable auto trigger mode
+I Enable auto trigger mode
Presentation and Handheld Auto Trigger Mode Commands
Command Description
[DL5 Presentation auto trigger mode
[DL6 Handheld auto trigger mode
94
"Trigger is released"
"Press trigger again to start reading"
"Output data"
"Output data"
Default
✓
Default
✓