Precautions For Sending Command Packets; Figure 6: Precautions For Sending Command Packets - Opticon MDI-4000 Series Serial Interface Manual

3.2 Precautions for Sending Command Packets

Startup Settings
*1*2
Stored in flash
Z2 command
Copy the active settings
to startup settings
[BAP command
Copy the custom settings
to active settings
Custom Settings
*2
Stored in flash
*1
Only configures the factory default settings in an environment where power is stable.
*2
These areas are cleared when a firmware update is loaded. They can be rewritten up to 100,000 times.

Figure 6: Precautions for Sending Command Packets

Power on/Reset
Copy the startup settings
to active settings
Active Settings
in RAM
[BAQ command
Copy the active settings
to custom settings
MDI-4000 Series Serial Interface Manual
Serial command
Changes one or
more active settings
Default command or
firmware update
Copy the factory defaults
to active settings
*1
[EFY command
Changes one or
more settings
Factory Defaults
*1
Stored in flash
9