Iata - Opticon MDI-4000 Series Serial Interface Manual

Code128 Settings
Setting
Character set
Start/stop code
Digits
Check Digit (CD) method
Code 128 Transfer Data Format
Digit
Data
GS1 Conversion
Disable/Enable GS1-128 GS1 conversion is configurable. For more information, see
Conversion" on page
Code 128 Concatenation
When concatenation is enabled, scanned data is added to the end of the data buffered in the
scan engine, and then all of the data in the buffer is sent. You can concatenate a maximum of
400 characters.
The read time is updated each time the scan engine scans a barcode label. If the barcode is not
read within the read time, the buffered data is discarded. For more information, see
Time" on page
49.
If the Code128 barcode contains an FNC2 character as the leading digit, you cannot enable
concatenation. To concatenate data, you need to omit the leading FNC2 character.
Code 128 Optional Settings
Setting
GS1 Conversion
Concatenation
6.3.7

IATA

Setting
CD
CD transmission
Options
ASCII128 character
Function character (FNC1 – 4)
Code set selection character (A, B, C, and Shift)
Hidden character
Start pattern: 3 types (A, B, and C)
Stop pattern: 1type
Variable length
Modulus 103
Description
Variable length
55.
Command Description
OF Disable GS1-128
JF Enable GS1-128, only
OG Enable GS1-128, if possible
MP Disable concatenation
MO Enable concatenation
Command Description
4H Do not check CD
4I Check FC/SN only
4J Check FC/CPN/SN
4K Check FC/CPN/AC/SN
4M Do not transmit CD
4L Transmit CD
MDI-4000 Series Serial Interface Manual
"Read
Default
✓
✓
"GS1
Default
✓
✓
73