Interleaved 2 Of 5 And S-Code - Opticon MDI-4000 Series Serial Interface Manual

Start/Stop Code Transfer
Lets you configure the transfer start/stop code. You can also convert the code and transfer the
code when the start/stop code is transferred.
Codabar Optional Settings
Setting
CD
CD transmission
ST/SP transmission
Space insertion
ABC, CX conversion
6.3.5

Interleaved 2 of 5 and S-Code

Interleaved 2 of 5 (ITF) is a continuous two-width barcode symbology standardized by ISO/IEC
16390. ITF encodes digits and is used commercially on 135 mm film, for ITF-14 (GS1
implementation) barcodes, and on some product cartons (although, the products inside are
labeled with UPC or EAN barcodes).
Interleaved 2 of 5 Settings
Setting
Character set
Start/stop code
Digits
Check Digit (CD) method
Command Description
H7 Do not check CD
H6 Check CD
H8 Transmit Codabar CD
H9 Do not transmit Codabar CD
F0 Do not transmit start/stop code
F1 Start/stop code: ABCD/TN*E
F2 Start/stop code: abcd/tn*e
F3 Start/stop code: ABCD/ABCD
F4 Start/stop code: abcd/abcd
HJ Start/stop code: <DC1><DC2><DC3><DC4>
/<DC1><DC2><DC3><DC4>
HE Disable space insertion
HD Enable space insertion
HA Enable only Codabar normal mode
H4 Enable only ABC code
H5 Enable only CX code
H3 Enable Codabar/ABC and CX
Options
Numeric (0 - 9)
Hidden character
Variable length (even number)
Modulus 10/Wait 3
MDI-4000 Series Serial Interface Manual
Default
✓
✓
✓
✓
✓
71