Usb-Hid Basic Information; Connection Confirmation (Usb-Hid) - Opticon MDI-4000 Series Serial Interface Manual

4.3.3

USB-HID Basic Information

These are the basic USB-HID settings.
USB-HID Settings
Setting
USB
Required power supply
capacity
Vendor ID
Product ID
Num/Caps Lock control
Data transmit speed
Data transmit interval
(Inter-character delay)
Suspend mode Remote
wakeup
Keyboard language
Character code
Output mode
4.3.4

Connection Confirmation (USB-HID)

To use USB-HID, you need to connect to a PC running Microsoft Windows 10.
Confirm the USB-HID Connection
1. Connect the scan engine to the PC.
2. Right-click the Microsoft Windows icon and select Device Manager.
3. Expand Human Interface Devices. All USB-HID devices connected to the PC are listed.
4. Make sure "USB Input Device" appears in the list of devices.
Description
USB2.0 Full Speed
500 mA
065 A
A001
Set when using NumLock/CapsLock
Use when outputting data with high speed.
Use when data is missing.
Use when host system is using suspend.
Set according to the keyboard language.
Set according to the reading symbol
encoded data.
Set when outputting Chinese characters.
MDI-4000 Series Serial Interface Manual
Notes
Differs from actual power
consumption.
Initial value: No control
Initial setting: 4 ms (setting
range 1 ms to 16 ms)
Initial value: No interval
Initial value: Valid
Initial value: English (USA)
Initial value: Do not use
character code
Initial value: Output as is
33