Default Settings 2: Read Options, Trigger, Buzzer; Default Settings 3A: Serial Communication Settings-Rs-232C, Usb-Vcp; Default Settings 3B: Serial Communication Settings-Rs-232C; Default Settings 4A: Keyboard Communication Settings-Usb-Hid, Wedge - Opticon OPI 2002 Specification Manual

11.3. Default Settings 2: Read Options, Trigger, Buzzer

Item
Setting the number of characters
Read mode
Multiple column read
NW-7 intercharacter gap check
Trigger switch
Read time
Buzzer duration
Buzzer tone
Buzzer loudness
Good read LED
11.4. Default Settings 3A: Serial Communication Settings—RS-232C, USB-VCP
Parameter
ACK/NAK
Flow Control time out
ACK/NAK timeout
Command header
Command terminator
ACK/NAK for RS-232C comm.
11.5. Default Settings 3B: Serial Communication Settings—RS-232C
Parameter
Baud rate
Parity bits
Data length
Stop bits
11.6. Default Settings 4A: Keyboard Communication Settings—USB-HID, Wedge
Parameter
Intercharacter delay
Keyboard language
Default Setting
Fixed length OFF all codes
Single read
Disable
Enable intercharacter gap check
Enable
2 seconds (when trigger enabled)
50 ms
Single tone (3 kHz)
Maximum
Indicator duration 200 ms
"U2" and "C01" Default Setting
No handshaking
Indefinitely
100 ms
ESC/STX
CR/ETX
Disable
"U2" Default Setting
9600 bps
No parity
8 bits
1 bit
"SU" and "UB" Default Setting
10 ms
US keyboard, 103 keys
33
Opticon
OPI 2002
Specifications Manual