Operation - Danfoss AK-CC55 User Manual

User Guide | Controller for appliance control, AK-CC55

Operation

The controller can be operated in different ways depending on the user interface.
The following options are available:
Direct
Menu buttons on display front
Smart phone and app
Via data commmunication
Via system unit's display
Via system unit and service tool
Programming via interface MMIMYK
and PC software type KoolProg®
16 | BC308437742037en-000101
Operation via menu system. See subsequent pages.
The display can be located on the front of the controller or at a
distance of up to 100 metres from the controller.
There is an app available - "AK-CC55 connect". It can be
downloaded freely to a compatible iOS/Android smartphone
device. The functions can be seen later in this document.
The display can be placed at a distance of up to 100 metres
from the controller. Menu operation is established by activating
Bluetooth communication to the app.
All controllers can be operated from a central location
e.g. AK-SM 800.
Data communication is to take place via MODBUS or Lon.
Operation can also be performed from a central location via the PC
software "Service Tool".
Data communication is to take place via MODBUS or Lon to system
manager AK-SM720.
Configuration of the controller can be performed via the PC
software KoolProg®. Data communication is to take place using the
display outputs and interface type MMIMYK.
© Danfoss | DCS (vt) | 2019.09