Danfoss AK-CC55 User Manual page 24

User Guide | Controller for appliance control, AK-CC55
Compact - continued
Configuration of alarm relay:
The alarm relay will be activated by an alarm in one or
more of the following priorities.
Setting:
0 = The relay is not activated by alarms
1 = Only high priority alarms
2 = High and medium priority alarms
3 = High, medium and low priority alarms
Max. opening time of night blinds after a manual
override with DI activation.
Stop time for fans while the night blinds roll down
Cycle time for rail heat at PWM on AO1
User defined refrigerant 3-digit Rfg. factor K1
User defined refrigerant 3-digit Rfg. factor K2
User defined refrigerant 3-digit Rfg. factor K3
Max. limitation of the superheat reference when
regulated with liquid-filled evaporator
Min. limitation of the superheat reference when
regulated with liquid-filled evaporator
Access code 1 (simple access)
Locking of setting display
0 = display is never locked
1 = display is locked after 15 minutes of inactivity.
Display must be unlocked by pressing up and down
button simultaneously for 3 seconds.
Configuration of relay output DO2: 0=not used,
1=fan, 2=fan Eco, 3=defrost, 4=rail heat, 5=alarm,
6=light, 7=night blinds, 8=compressor, 9=compressor
2, 10=heating element
Configuration of relay output DO3: 0=not used,
1=fan, 2=fan Eco, 3=defrost, 4=rail heat, 5=alarm,
6=light, 7=night blinds, 8=compressor, 9=compressor
2, 10=heating element
Configuration of relay output DO4: 0=not used,
1=fan, 2=fan Eco, 3=defrost, 4=rail heat, 5=alarm,
6=light, 7=night blinds, 8=compressor, 9=compressor
2, 10=heating element
Configuration of analogue output AO1: 0=not used.
1=rail heat PWM
Manual control of output: AKV valve 0-100%
Manual control of output: Compressor1/LLSV
Manual control of output: Fan
Manual control of output: Defrost
Manual control of output: Rail heat
Manual control of output: Alarm
Manual control of output: Light
Manual control of output: Compressor 2
Manual control of output: Night blinds
Manual control of output: Heating element
Manual control of output: Fan Eco
Manual control of output: Rail heat PWM
Define which food temperature measurement to
display in U72: 1=thermostat temperature, 2=alarm
temperature, 3=S3
Service
Control mode
Temperature measured with S5 sensor
Status on DI1 input. on/1=closed
Actual defrost time (minutes)
Temperature measured with S3 sensor
24 | BC308437742037en-000101
R-W Code 1 2 3 4
1-2 P41 1 1 1 1
1-2 P60 1
1-2 P65 1
1-2 P82 1 1 1 1
1-3* P83
1-3* P84
1-3* P85
1-2 P86
1-2 P87
1-1 P88 1 1 1 1
1-2 P89 1 1 1 1
1-3* q02 1
1-3* q03 1
1-3* q04 1
1-3* q09 1 1 1 1
1-2** q11
1-2** q12 1 1 1 1
1-2** q13 1 1 1 1
1-2** q14 1 1 1 1
1-2** q15 1 1
1-2** q16 1 1
1-2** q17 1 1
1-2** q19 1
1-2** q21 1
1-2** q23 1
1-2** q24 1
1-2** q27 1 1 1 1
1-2* q39 1 1 1 1
0-0 u00 1 1 1 1
0-0 u09 1 1 1 1
0-0 u10 1 1 1 1
0-0 u11 1 1 1 1
0-0 u12 1 1 1 1
5 6 7 8 9 Min.
1 1 1 1 1 0
1 0 min.
1 0 sec.
1 1 1 1 1 4 sec.
1 1 1 1 1 -999
1 1 1 1 1 -999
1 1 1 1 1 -999
1 1 1 1 1 "P87"
1 1 1 1 1 0°C
1 1 1 1 1 0
1 1 1 1 1 0/Off
1 0
1 0
1 0
1 1 1 1 1 0
1 1 1 1 1 0 %
1 1 0/Off
1 1 1 1 1 0/Off
1 1 1 1 1 0/Off
1 1 0/Off
1 1 0/Off
1 1 0/Off
1 0/Off
1 0/Off
1 0/Off
1 0/Off
1 1 1 1 1 0 %
1 1 1 1 1 1
1 1 1 1 1
1 1 1 1 1
1 1 1 1 1
1 1 1 1 1
Max. Fac. Actual
3 2
60 min. 5
300 sec. 0
60 sec. 10
999 300
999 300
999 300
20°C 3
"P86" 1
999 0
1/On 0/Off
10 0
10 0
10 0
1 0
100 % 0
1/On 0/Off
1/On 0/Off
1/On 0/Off
1/On 0/Off
1/On 0/Off
1/On 0/Off
1/On 0/Off
1/On 0/Off
1/On 0/Off
1/On 0/Off
100 % 0
3 2
© Danfoss | DCS (vt) | 2019.09