Installing T/H Sensors - Huawei NetCol5000-A021 User Manual

NetCol5000-A021 In-row Air Cooled Smart Cooling
Product
User Manual (208 V)
Figure 3-55 Pin sequence of an RS485 monitoring cable
----End

3.11.6 Installing T/H Sensors

To install the T/H sensors, you need to connect cables to the sensors and set DIP switches for
the sensor.
Context
If more than one T/H sensor is connected to an smart cooling product, the smart cooling
product must differentiate various T/H sensors based on DIP switch settings on the sensors
that change their communications addresses.
Figure 3-56 T/H sensor
Issue 03 (2020-01-10) Copyright © Huawei Technologies Co., Ltd.
Figure 3-56 shows a T/H sensor.
3 Installation Guide
83