Huawei NetCol5000-A021 User Manual page 71

NetCol5000-A021 In-row Air Cooled Smart Cooling
Product
User Manual (208 V)


Determine the water pipes to be connected based on whether a water pump is configured, as
described in
Table 3-12 Pipe routing description
Drainage
Mode
Water pump
A water pump drainpipe can be routed from the top or bottom. Determine the pipe routing
mode based on site conditions.
Top Pipe Routing
Use an adjustable wrench to remove the water pipe plug from the top of the NetCol5000-A,
and connect the drainpipe, as shown in
Issue 03 (2020-01-10)
When procuring water pipes, ensure that the water pipes covered with thermal insulation
foam can be routed through holes in the bottom or top plate. For the hole specifications,
see 3.8.1 Preparing Knock-out
The humidifier water inlet pipe connects to running water or other water supply systems,
and the drainpipe connects to the drainage system.
Table 3-12.
Pipe Routing Mode
Top
Bottom
Copyright © Huawei Technologies Co., Ltd.
Holes.
Connection Method
See A in Figure
See B and C in
Figure 3-36.
3 Installation Guide
3-4.
Figure 3-4.
63