Torque Specifications; Motor Power Feed Through; Table 18 - Tower Plate Torque Specifications; Figure 53 - Tower Plate Torque Pattern - Danfoss Turbocor VTT Series Service Manual

Figure 53 - Tower Plate
Torque Pattern
3.3.4.2 Torque
Specifications
Table 18 - Tower Plate

Torque Specifications

3.3.5 Motor Power Feed
Through
Figure 54 - Motor Power
Feed Through
Compressor Components
5
3
8. Leak test the Compressor to the appropriate pressure and industry standards.
9. Evacuate the Compressor to the appropriate pressure and industry accepted standards.
10. Charge the Compressor with refrigerant.
11. Restore power to the Compressor
Tower Plate, SHCS, M6x30
The Motor Power Feed Through connects the Motor Bus Bars to the internal motor leads while
preventing refrigerant pressure from escaping.
Disassembling the Motor Power Feed Through poses a risk that can lead to permanent damage.
All hardware and tools must be accounted for prior to restarting the Compressor.
7 2
10
1
Description
• • • CAUTION • • •
9
4
6
8
Nm Ft.Lb.
10 7
M-SV-VT-001-EN Rev. A
In.Lb.
89
59 of 165