Rear Bearing Sensor Cable; Figure 97 - 9-Pin Connector; Figure 98 - Feed Through Connector; Figure 99 - Rear Bearing Sensor Cable - Danfoss Turbocor VTT Series Service Manual

Figure 97 - 9-Pin Connector

Figure 98 - Feed Through
Connector
3.7.1.8 Rear Bearing
Sensor Cable
Figure 99 - Rear Bearing
Sensor Cable
Compressor Components
The Rear Bearing Sensor Cable provides shaft position information from the Rear Bearing Sensor Feed
Through to the CCM. The Rear Bearing Sensor Cable also receives a signal from the Stator Cooling
Temperature Sensor.
5
9
4
8
3
7
2
6
1
5 7
8
6
4
11
3
10
9
2 1
M-SV-VT-001-EN Rev. A
87 of 165