Power Side; Motor Power Cover; Figure 46 - Motor Power Cover (Revision A); Figure 47 - Motor Power Cover (Revisions B And Later) - Danfoss Turbocor VTT Series Service Manual

Variable twin turbo compressors

Table of Contents

3.3 Power Side

Figure 46 - Motor Power

Cover (Revision A)

Figure 47 - Motor Power

Cover (Revisions B and Later)

52 of 165

M-SV-VT-001-EN Rev. A

Compressor Components

The Motor Power Cover provides protection for the connection of the cables from the VFD to the

Compressor motor. There are two (2) variants of this cover as shown below. The most noticeable

difference is there are four (4) mounting screws for the "A" Revision while the later revisions have six

(6) mounting screws.

Torque to 6 Nm

(53 in.lb.)

(4 places)

Torque to 6 Nm

(53 in.lb.)

(6 places)

Table of Contents

Do you have a question about the Turbocor VTT Series and is the answer not in the manual?