Appendix B: Configuring And Updating The Sp-Iii Tpu; B.1 Starting Linux Tpu Updater; The Klein Linux Tpu Updater Dialog Box - Klein 4900 Series Operation And Maintenance Manual

APPENDIX B: C
SP-III TPU is configured at the factory. However, should changes be required,
configuring and updating the SP-III TPU can be performed using Linux Updater.
This program is automatically installed when installing SonarPro 12.1 and can be
used to perform the following tasks:
• Query or change the IP address of the SP-III TPU.
• Edit the startup file of the SP-III TPU.
• Download and install software updates to the SP-III TPU.

B.1 Starting Linux TPU Updater

Linux TPU Updater is started by double-clicking the Linux TPU Updater icon
on the Windows desktop. The Klein Linux TPU Updater dialog box will open as
shown Figure B-1.
ONFIGURING AND
SP-III TPU
THE
Figure B-1:

The Klein Linux TPU Updater Dialog Box

B-1
U
PDATING