Appendix B: Configuring And Updating The Sp-Ii Tpu; Starting Linux Tpu Updater - Klein 3900 Series Operation And Maintenance Manual

APPENDIX B: C
The SP-II TPU is configured at the factory. However, should changes be required,
configuring and updating the SP-II TPU can be performed using Linux Updater.
This program is automatically installed when installing SonarPro 12.1 and can be
used to perform the following tasks:
• Query or change the IP address of the SP-II TPU.
• Edit the startup file of the SP-II TPU.
• Download and install software updates to the SP-II TPU.
B.1 Starting Linux TPU Updater
Linux TPU Updater is started by double-clicking the Linux TPU Updater icon
on the Windows desktop. The Klein Linux TPU Updater dialog box will open as
shown Figure B-1.
ONFIGURING AND
SP-II TPU
THE
The Klein Linux TPU Updater Dialog Box
Figure B-1:
B-1
U
PDATING