Figure 4-2: Removing The Tail Cone; Tail Cone Removed From The Towfish Housing - Klein 4900 Series Operation And Maintenance Manual

4-4
CHAPTER 4 Equipment Maintenance
Pull the tail cone away
4.
from the towfish housing,
and then reach inside the
housing and disconnect the
jumper cable.
Set the tail cone aside, and
5.
then remove the tail cone
retaining bolt which is
shown in Figure 4-3.
Series 4900 Sonar System Operations and Maintenance Manual
Jumper cable
Figure 4-2:
Removing the Tail Cone
Figure 4-3:
Tail Cone Removed from the
Towfish Housing
P/N 11210091, Rev. 02
Tail cone
retaining bolt