Monitor; Tablet Holder - Planmeca Compact i Classic v2 User Manual

8 Planmeca Compact i dental unit

8.5 Monitor

8.6 Tablet holder

22 Planmeca Compact i
3. Push the bowl downwards at the same time making sure that no cables
are squeezed.
4. Turn the bowl assembly into place. You will know that it is in place when
you hear the clicking sound of the micro switch
The monitor can be moved from its handle.
CAUTION
Do not allow the patient to grab the monitor handle or monitor arm when
getting seated or getting up from the patient chair.
NOTE
Never spray water on the monitor or the PC.
For more information, see the monitor's user's manual.
A tablet can be attached to the tablet holder on the Flexy-holder.
Before attaching the tablet to the tablet holder, ensure that the round mount
interface is glued to the backside of the tablet.
To attach the tablet to the tablet holder, position the mount interface towards
its counterpart on the tablet holder slightly askew so that they interlock.
Then, turn the tablet 45° to either side to lock the tablet to the tablet holder.
NOTE
Ensure that the tablet is protected from splashes.
NOTE
Planmeca is not liable for damages caused to the tablet caused by
negligence, including but not limited to dropping the tablet on the floor.
The tablet can be charged from the USB port on the cuspidor, see section
"Cuspidor" on page 23.
User's manual