Assigning Planid Card To User - Planmeca Compact i Classic v2 User Manual

17 Assigning PlanID card to user

17 Assigning PlanID card to user
Before you begin
About this task
Steps
60 Planmeca Compact i
Prerequisites:
• Planmeca Romexis version 4.6 or later installed
• Dental unit is connected to the Planmeca Romexis server
• Dental unit's PlanID reader has been enabled by a qualified Planmeca
service technician.
For information on the dental unit's configuration requirements, contact your
Planmeca dealer.
Before you assign the PlanID card to a user, the user must be created in the
Admin module of Planmeca Romexis. This is typically done by a Planmeca
Romexis administrator.
The following information must be supplied when creating the user:
Add User window, User tab
• In
• Username
• Member of Groups
We recommend that you create a group for PlanID users and add all
PlanID users to that group.
Add User window, Personal tab
• In
• First Name
• Last Name
Planmeca Romexis technical manual , chapter
For instructions, see
Administration , section Resource .
Before you sign in to the dental unit with the PlanID card for the first time,
you must assign the PlanID card to the user. This is done from the
Planmeca Romexis computer, see
(30005120).
1. Follow the instructions in the
PlanID card to the user.
Planmeca PlanID quick guide
Planmeca PlanID quick guide to assign the
User's manual