Patient Chair; Patient Recognition; Automatic Legrest - Planmeca Compact i Classic v2 User Manual

12 Patient chair

12 Patient chair

12.1 Patient recognition

12.2 Automatic legrest

44 Planmeca Compact i
CAUTION
Make sure no one sits on the legrest or the backrest.
NOTE
The patient chair can be equipped with a fixed or an automatic legrest.
NOTE
Dark coloured clothes may cause coloured stains on the bright coloured
upholstery.
A sensor in the patient chair recognises if there is a patient in the chair and
forwards information about this to Planmeca Romexis Clinic Management
software.
The automatic legrest can be moved synchronously to the movements of the
backrest, that is, when you drive the backrest down, the automatic legrest is
driven up. Use the chair movement buttons to drive the patient chair. Notice
that the lever underneath the legrest has to be unlocked (moved to the right)
in order to move the legrest with the backrest. Support the legrest with your
other hand when locking or unlocking the lever.
1. Automatic legrest
2. Lever
User's manual