Changing Light Tone Of Operating Light - Planmeca Compact i Classic v2 User Manual

19.4.6 Changing light tone of operating light

From operating light
From dental unit
User's manual
NOTE
The foot control can be configured so that the intensity is adjusted when you
push and hold the left-side or the right-side knob up. Contact your Planmeca
dealer.
The white light tone of the operating light can be warm, neutral or cool.
From both handles
When the light is on (and composite mode off), press and hold both handle
buttons simultaneously to toggle between the three colour temperatures
warm, neutral and cool.
You will hear a signal tone when you toggle the colour temperature from the
handle buttons.
You can change the light tone by pushing the left-side or the right-side knob
up, if this function has been configured to the foot control. To configure the
function, contact your Planmeca dealer.
Alternatively, you can change the light tone by pressing the Flexy button, if
this function has been configured to the Flexy button. To configure the
function, contact your Planmeca dealer.
You can also change the light tone in the programming window, see section
"White light tone" on page 104.
19 Operating dental unit
Planmeca Compact i 75