Signing In And Out With Planid; Signing In - Planmeca Compact i Classic v2 User Manual

16 Signing in and out with PlanID

16 Signing in and out with PlanID

16.1 Signing in

58 Planmeca Compact i
Planmeca PlanID allows you to sign in to the dental unit and use the dental
unit with your own personal settings.
If your dental unit does not include Planmeca PlanID, you do not sign in, but
can start using the dental unit immediately after you have switched the
dental unit on.
NOTE
Signing in to the dental unit with Planmeca PlanID is possible only with
certain dental unit configurations. For more information on the configuration,
or for changing it, contact your Planmeca dealer.
NOTE
Before you can sign in with a PlanID card, you must assign a PlanID card to
your user profile. For instructions, see section "Assigning PlanID card to
user" on page 60.
If you have a PlanID card and the dental unit is equipped with a PlanID
reader, sign in by showing the PlanID card to the PlanID reader on the
instrument console.
CAUTION
At least 15 cm of separation distance between the PlanID reader and the
user's body must be maintained at all times.
When the dental unit configuration requires signing in, the text
shown on the display.
When you have signed in, the text
The small dot in the text indicates that the Romexis connection is enabled. If
there is no dot, the connection to Romexis is disabled and you cannot sign in
with the PlanID card.
USE·r is shown on the display.
SIG·n is
User's manual