Table of Contents
Advertisement
8.5 Monitor
8.6 Tablet holder
8.7 USB connectivity
User's manual
The monitor can be moved from its handle.
CAUTION
Do not allow the patient to grab the monitor handle or monitor arm when
getting seated or getting up from the patient chair.
NOTE
Never spray water on the monitor or the PC.
For more information, see the monitor's user's manual.
A tablet can be attached to the tablet holder on the Flexy-holder.
Before attaching the tablet to the tablet holder, ensure that the round mount
interface is glued to the backside of the tablet.
To attach the tablet to the tablet holder, position the mount interface towards
its counterpart on the tablet holder slightly askew so that they interlock.
Then, turn the tablet 45° to either side to lock the tablet to the tablet holder.
NOTE
Ensure that the tablet is protected from splashes.
NOTE
Planmeca is not liable for damages caused to the tablet caused by
negligence, including but not limited to dropping the tablet on the floor.
The tablet can be charged from the USB port on the cuspidor, see section
"USB connectivity" on page 25.
The dental unit has two USB ports for different purposes.
1. The USB port on the cuspidor marked "user settings and service" offers
a USB connection for downloading/uploading your personal settings. It
can also be used by a qualified Planmeca service technician in service
situations.
2. The USB port on the cuspidor marked "Planmeca specified USB device
only" enables the use of an intraoral camera on the assistant side.
8 Planmeca Sovereign Classic dental unit
Planmeca Sovereign Classic
25
Advertisement
Table of Contents
