Selecting Automatic Position; Selecting Rinsing Position - Planmeca Compact i Classic v2 User Manual

18 Operating patient chair

18.2.2 Selecting automatic position

18.2.3 Selecting rinsing position

Foot control
64 Planmeca Compact i
Control panel: To move the chair to a preprogrammed position, press briefly
the corresponding chair position button.
Foot control: Push the centre knob briefly to the position (A, B, C or D)
where the preprogrammed chair position has been stored. The chair will
move automatically to the preprogrammed position.
Press Rinsing position to move the chair to the preprogrammed rinsing
position. The indicator light flashes throughout the movement. Filling the cup
starts automatically and the bowl is rinsed.
When the chair stops in the rinsing position, the indicator light remains on.
When you press Rinsing position again, the chair will return to the previous
working position. Bowl rinsing starts automatically. The indicator light flashes
throughout the movement.
You can drive the chair to the rinsing position by pushing the pedal to the far
right and down.
You can also drive the chair to the rinsing position with the foot control by
pushing down the right-side knob.
To return to the working position, push down the right-side knob again.
For information on how to program the rinsing position, see section
"Automatic chair positions" on page 97.
NOTE
Alternatively, the dental unit can be configured so that the chair moves to the
preprogrammed rinsing position when you press the Flexy button. Contact
your Planmeca dealer.
User's manual