Screen Map - Graco ProBell Electrostatic Controller Instructions And Parts

Screen Map

RUN
Press and hold for 5 seconds
from any SETUP screen. Also
shown on power up.
3A3657C
SETUP SCREENS 0–7
(Parameters)
Press and hold for 5 seconds
from any RUN screen. Or, press
from SETUP SCREENS 8–11.
Screens that are not implemented
for the Electrostatic Controller are
not shown.
Solventborne
or
Waterborne
T1/T2
Screen Map
SETUP SCREENS 8–11
(Configurations)
Press from SETUP SCREENS
0–7.
T1/T2
57