Table of Contents
Advertisement
Controller Display and Features
Checking the Software Version
1. Press the
key and the
2. The software version is displayed as long as the
keys are held.
Restore Factory Defaults
All parameters (except P00) and configurations (C0
– C3), as well as all user-defined values, will be
overwritten with factory default. Any active keyboard
lock or screen lock will be removed.
Maintenance counts, state (active/non-active) and
setpoints are NOT reset.
NOTE: By restoring factory defaults, except for
display backlight setting, all user-made settings will
be set to factory default.
40
1. Press off on the controller.
2. Press and hold
at the same time.
3. Press on on the controller. The CLr display
4. Wait for approximately 5 seconds, until CLr
5. Release the
6. All values are reset.
Auto Power Save Mode
The display backlight turns off automatically after five
minutes of electrostatics inactivity. Touching any key
will turn the display backlight back on.
.
blinks.
disappears.
key.
3A3657C
Advertisement
Table of Contents
