Metal Core Drilling
Assembly
Positioning the shaft
Steps that must be completed:
-
Assembling the shaft
-
Assembling the gearbox parts
Tools:
-
Arbor press
-
Sleeve
40 mm inner diameter, 54 mm outer diameter
-
Circlip pliers
-
Combination pliers
1
2
3
C-SC_CSSM
1.
2.
3.
4.
Version 1.0
All rights reserved by FEIN, especially in case of property rights applications.
FEIN retains all rights of disposal, such as copying and circulation.
Coat the shaft (1) with grease.
Press on the shaft (1).
Position the circlip (2).
Position the feather key (3).
01.04.2021
34130550060
Printed in Germany
Page 73 of 92