Chapter 5 Data Display; Navigating In The Display Mode - Satec C191HM Installation And Operation Manual

Chapter 5 Data Display

5.

5.1 Navigating in the Display Mode

The front panel has a simple interface that allows you to display numerous
measurement parameters in up to 45 display pages. For easier reading, the
parameters are divided into three groups, each accessible by a designated key.
These are:
Common measurements
Min/Max measurements
Total Harmonic measurements
Individual Harmonics measurements
Energy measurements
The up/down arrow keys are used as follows in the Display Mode:
Scrolls through the pages downward (forward)
Scrolls through the pages upward (backward)
Returns to the first page within current measurement group
When pressed for 5 seconds, clears the alarm LED
Load bar graph -
indicates %
current load
round LEDs -
indicate
measurement
group
The front panel display is updated approximately twice per second; you can
adjust the display update rate via the Display Setup Menu (see Section 4.8).
Table 5-1 lists all displayed parameters and their LED indicators.
Chapter 5 Data Display
- no selection key
- selected by the
MAX/MIN
- selected by the
H/ESC
- selected by the
H/ESC
- selected by the
ENERGY
arrow LEDs -
indicate measured
parameter
key
key
key
key
39