Chapter 6 Viewing Status Information; The Status Information Menu; Status Display Formats - Satec C191HM Installation And Operation Manual

Chapter 6 Viewing Status Information

6.
Through the Status Information Menu (StA), it is possible to view the status of various
instrument features.

6.1 The Status Information Menu

StA
SELECT
To enter the Status Information Menu:
From the display mode, press
Press
SELECT
Press . .
ENTER
To select a display page:
Press the up/down arrow keys to scroll through the display pages.
To quit the menu and return to the display mode:
Press or
ESC
Front Panel Display
When you are in the Status Information Menu, the front panel display is updated
approximately four times per second and shows you a wide variety of status
information that you can review by scrolling through display pages.
The status parameters are designated by the abbreviated labels in the upper
and/or middle window. The upper window flashes, indicating that you are in the
menu display.
Fast Reset of Counters
When changing data via the front panel is not secured by a password, you can
reset the counters from the Status Information Menu display without entering the
reset menu:
Select a display page where the counter you want to reset is displayed.
While holding the
The displayed data is reset to zero.

6.2 Status Display Formats

Table 6-1 lists all the displays available from the Status Information Menu. The
display windows are labeled in the table as follows: 1 = upper window, 2 =
middle window, 3 = lower window.
Chapter 6 Viewing Status Information
ENTER
to enter the Primary Selection Menu.
SELECT
to activate the StA window.
.
ENTER
key, press and hold
SELECT
ENTER for about 5 seconds.
47