Access Control Menu - Satec C191HM Installation And Operation Manual

4.10 Access Control Menu

CHG
SELECT
This menu can be only accessed via the Setup Change Menu (CHG). It is used
in order to:
• change the user password
• enable or disable password check
To view an option setting:
SELECT
Press
Use the up/down arrow keys to scroll to the desired option (PASS or CtrL).
To change the password:
Press
SELECT
Use the up/down arrow keys to modify the password. The password can be
up to four digits long.
Press
ENTER
unchanged.
To enable/disable password checking:
Press
SELECT
arrow keys to move to the CtrL entry.
Press
SELECT
Use the up/down arrow keys to change the password checking status: select
OFF to disable password protection, or select On to enable password
protection.
Press
SELECT
unchanged.
To quit the setup menu:
From the middle window, press
Store your password in a safe place. If you do not provide the correct
password, you will need to contact your local distributor for the super-user
password to override password protection.
Chapter 4 Setup Menus
ENTER
to activate the middle window.
Password Setting Password Protection Control
AccS
PASS
8780
to activate the lower window.
to store your new password, or
to activate the middle window, and then use the up/down
to activate the lower window.
to store your new option, or
or
ESC
AccS
AccS
CtrL
OFF
to leave the password
ESC
to leave the option
ESC
.
ENTER
ENTER
37