Related Manuals for Ferno Mondial MB64
Summary of Contents for Ferno Mondial MB64
- Page 1 Mondial® Monobloc MB64, MB70 Users’ Manual November 2017 Pub. No. 234-3480-06 Read this Manual and Retain for Future Reference...
-
Page 2: Ferno Customer Relations
Limited Warranty Statement 1.937.382.1451 The products sold by Ferno are covered by a limited warranty, which is printed on all Ferno invoices. The complete terms and conditions of Ferno Washington Italia S.r.l. the limited warranty, and the limitations of liability and disclaimers, via B. -
Page 3: Table Of Contents
Parts List ________________________________________ 33 Backrest with Extending Headrest (Optional) ___________ 18 10 - Accessories __________________________________________ 34 Training Record__________________________________________ 35 5.10 Backrest with Airway Management Frame (Optional) ____ 18 Maintenance Record _____________________________________ 35 © Ferno-Washington, Inc. / 234-3480-06 / November 2017... -
Page 4: Safety Information
Use of a Ferno cot/transport system only as described in this manual. with a non-Ferno fastening system is misuse of the Ferno product. The Improper parts and service can cause injury. Use only user assumes responsibility for the outcome of known, intentional Ferno parts and Ferno-approved service on the cot. -
Page 5: Symbol Glossary
Safety Information 1.6 Symbol Glossary The symbols defined on this page are used on the cot and/or in this’ manual. Ferno uses symbols recognized by the International Standards Organization (ISO), American National Standards Institute (ANSI) and General Warning of Pinch Point: the emergency medical services industry. -
Page 6: Operator Focus
Safety-Lock Device (if equipped) are mechanism. Tuck sheets between the pad and the patient surface. located. This area is also known as the (patient’s) head end. Keep other articles above the pad. © Ferno-Washington, Inc. / 234-3480-06 / November 2017... -
Page 7: Using Additional Help
● Important Follow local protocols. Trained operators position themselves at the loading end Ferno recommends that helpers work in pairs to help maintain cot ● and control end of the cot and operate the controls. Show balance. helpers where to stand and how to grasp the cot. -
Page 8: About The Cot
3 - ABOUT THE COT 3.1 Description WARNING The Ferno® Mondial® Monobloc Series Cot (called the cot in this manual) Improper use of the cot can cause injury. Use the cot only is an emergency patient-handling device designed to transport a for the purpose described in this manual. -
Page 9: Compliance
Ferno products meet the requirements of Medical Device Directive 44 st on page 31. 93/42/EEC as established by the European Union. CERTIFICATION The Mondial® Monobloc cot, when used with a Ferno® FL1 or EFX-Lock All Models fastener, meets European Harmonized Standards. Specifications Imperial Metric U.S.A. -
Page 10: Cot Positions
About the Cot 3.4 Cot Positions Both Legs Fold Toward Control End Bed Position 1 (Lowest Transfer Position) Folded (Ambulance) Position Bed Position 3 (Mid-Level Transfer) Bed Position 6 (Rolling Position) © Ferno-Washington, Inc. / 234-3480-06 / November 2017... -
Page 11: Setup
The patient compartment should have a level floor large enough for the Attaching improper items to the cot can cause injury. Use folded cot, and a Ferno® fastening system installed (not included). See only Ferno-approved items on the cot. “Fastening System Compatibility” on page 4. -
Page 12: Attaching The Leg Restraint
Pressing the rear of the strap/button against Control-end the bracket as you pull upward will help seat Bracket Keyhole the button in the bracket. The restraint keeper helps prevent accidental removal of the restraints from the bracket. © Ferno-Washington, Inc. / 234-3480-06 / November 2017... - Page 13 Attach the shoulder straps to the keyhole bracket nearest the loading end of the cot. Pressing the rear of the strap/button against the bracket as you pull upward will help seat the button in the bracket. © Ferno-Washington, Inc. / 234-3480-06 / November 2017...
-
Page 14: Using The Features
Green: Legs Locked Red: Legs Unlocked Always maintain your grasp on the cot until you verify that both ○ legs have locked at the new position. © Ferno-Washington, Inc. / 234-3480-06 / November 2017... -
Page 15: Swivel-Lock Release Lever
To maintain proper function of the swivel caster lock pins, clean ● as needed with water and a mild detergent. If this is insufficient, lubricate the lock pins. See “Lubricating the Cot” on page 32. Trailing End of Caster © Ferno-Washington, Inc. / 234-3480-06 / November 2017... -
Page 16: Wheel Locks
Usee: The permanent, built-in footrest (Figure 13) provides stability ● Footrest and support for a patient’s feet. The footrest can also be used by the Control-end Operator to pull and steer the cot while rolling it. © Ferno-Washington, Inc. / 234-3480-06 / November 2017... -
Page 17: Shock Frame
Working from the control-end of the cot, use the lifting strap to lift the shock frame slightly. With your thumb, press the shock frame control lever (Figure 17) to disengage the support bars, then lower the shock frame. Fasten and adjust the restraint(s). © Ferno-Washington, Inc. / 234-3480-06 / November 2017... -
Page 18: Backrest
Usee: To adjust the frame, pull the release bar (Figure 20), and rotate ● the frame to the new position. Let go of the bar to allow the frame to lock. © Ferno-Washington, Inc. / 234-3480-06 / November 2017... -
Page 19: Intermediate Loading Wheels
See”Carrying the Cot” on page 29. Set the cot down when you reach the destination. To disengage the leg lock, the control-end operator pushes the ● blue leg lock lever toward the loading end of the cot (Figure 22). © Ferno-Washington, Inc. / 234-3480-06 / November 2017... -
Page 20: Telescoping Handles (Optional)
Grasp the side handle with your other hand, using a cylindrical grip. When lifting, balance the cot by placing one operator or helper ○ on each side of the cot and lift together, using both handles. © Ferno-Washington, Inc. / 234-3480-06 / November 2017... -
Page 21: Smart-Load Automatic Leg Release (Loading-End Legs)
The loading-end legs fold and automatically unlock the control-end legs for folding. The operators finish pushing the cot into the ambulance and secure it in a Ferno® fastening system. © Ferno-Washington, Inc. / 234-3480-06 / November 2017... -
Page 22: Safety-Lock Device (Optional)
○ loading end of the cot (Figure 27) and a user-installed catch plate installed on the ambulance floor or ramp. Contact Ferno to order the appropriate SLD kit. See “Ferno Customer Relations” on page 2 and “Accessories” on page 34. -
Page 23: Using The Cot
Always use patient restraints to secure the patient on the cot. ● ● Select appropriate restraints for the patient being transported. A Ferno Patient Restraint Systems (Not Supplied) list of Ferno patient restraint systems compatible with the cot is at right. Metric Imperial Ferno Product... -
Page 24: Changing Cot Positions
Both Operatorse: If the legs have not locked, raise the cot a little higher until you hear an audible “click” from the locking mechanism, then retest. © Ferno-Washington, Inc. / 234-3480-06 / November 2017... -
Page 25: Transferring The Patient Onto The Cot
Before moving the cot or changing its Bed Position, make sure sheets and other articles will not interfere with cot operation. 10. Raise the cot to a suitable rolling height. See “Rolling the Cot” on page 26. © Ferno-Washington, Inc. / 234-3480-06 / November 2017... -
Page 26: Rolling The Cot
Loading-end Operator: Position yourself at the loading-end of the cot (Figure 31) or at the side of the cot near the patient’s torso. Grasp the main frame. Attend the patient and assist in rolling and steering the cot. © Ferno-Washington, Inc. / 234-3480-06 / November 2017... -
Page 27: Loading The Cot
Continue pushing the cot into the ambulance. Either Operatore: Secure the cot in a Ferno fastening system. Fold the folding tray ramp if needed. Talk to the Patient... -
Page 28: Unloading The Cot
This will allow the cot to be removed from the catch plate. Talk to the Patient Communicate before making changes to the cot height, and during the loading and unloading procedures. © Ferno-Washington, Inc. / 234-3480-06 / November 2017... -
Page 29: Carrying The Cot
If equipment is on the cot, raise or lower the cot in stages by adjusting the height only one or two positions at time. Prevent loose items from sliding off the cot. © Ferno-Washington, Inc. / 234-3480-06 / November 2017... -
Page 30: Maintenance
Hang the restraints to dry. Center control box assembly [090-5920] * ● Attach clean, dry restraints to the cot. For installation directions, * If equipped with control-end leg auto-release. see “Setup” on page 11. © Ferno-Washington, Inc. / 234-3480-06 / November 2017... -
Page 31: Disinfecting And Cleaning The Pad
Wipe all surfaces with disinfectant. Follow the disinfectant manufacturer’s instructions for application method and contact time. Ferno recommends you inspect the cot for damage as you disinfect it. Inspection Checklist 7.6 Cleaning the Cot Are all components present? ●... -
Page 32: Lubricating The Cot
Do not lubricate * The channels do not require lubrication. Lubricating the channels or rollers will Do Not Lubricate Lubricate cause foreign particles to stick to the rollers and channel, causing damage. © Ferno-Washington, Inc. / 234-3480-06 / November 2017... -
Page 33: Parts And Service
In the United States and Canada, to order parts or for professional Improper parts and service can cause injury. Use only repairs, contact EMSAR® – the only agent authorized by Ferno to Ferno parts and Ferno-approved service on the cot. -
Page 34: Accessories
Accessories 10 - ACCESSORIES Ferno offers a full line of accessories approved for use with the cot. WARNING Follow all instructions in accessory users’ manuals. Keep the instructions with this manual. Attaching improper items to the cot can cause injury. Use only Ferno-approved items on the cot. -
Page 35: Training Record
TRAINING RECORD Training Method Trainer Date Printed Name Signature Initials Read Video/ Hands-On Manual Online MAINTENANCE RECORD Date Maintenance Performed © Ferno-Washington, Inc. / 234-3480-06 / November 2017... - Page 36 © Ferno-Washington, Inc. / 234-3480-06 / November 2017...