Graco E-Flo DC Series Instructions Manual page 5

Circulation pumps
Hide thumbs Also See for E-Flo DC Series:
Table of Contents

Advertisement

PRESSURIZED EQUIPMENT
PRESSURIZED
PRESSURIZED
Fluid from the equipment, leaks, or ruptured components can splash in the eyes or on skin and
cause serious injury.
• Follow the Pressure
checking, or servicing equipment.
• Tighten all fluid connections before operating the equipment.
• Check hoses, tubes, and couplings daily. Replace worn or damaged parts immediately.
EQUIPMENT
EQUIPMENT MISUSE
EQUIPMENT
Misuse can cause death or serious injury.
• Do not operate the unit when fatigued or under the influence of drugs or alcohol.
• Do not exceed the maximum working pressure or temperature rating of the lowest rated system
component. See Technical
• Use fluids and solvents that are compatible with equipment wetted parts. See Technical
equipment manuals. Read fluid and solvent manufacturer's warnings. For complete information
about your material, request Safety Data Sheet (SDS) from distributor or retailer.
• Turn off all equipment and follow the Pressure
• Check equipment daily. Repair or replace worn or damaged parts immediately with genuine
manufacturer's replacement parts only.
• Do not alter or modify equipment. Alterations or modifications may void agency approvals and
create safety hazards.
• Make sure all equipment is rated and approved for the environment in which you are using it.
• Use equipment only for its intended purpose. Call your distributor for information.
• Route hoses and cables away from traffic areas, sharp edges, moving parts, and hot surfaces.
• Do not kink or over bend hoses or use hoses to pull equipment.
• Keep children and animals away from work area.
• Comply with all applicable safety regulations.
MOVING PARTS
MOVING
MOVING
Moving parts can pinch, cut or amputate fingers and other body parts.
• Keep clear of moving parts.
• Do not operate equipment with protective guards or covers removed.
• Pressurized equipment can start without warning. Before checking, moving, or servicing equipment,
follow the Pressure
TOXIC FLUID
FLUID OR
TOXIC
TOXIC
FLUID
Toxic fluids or fumes can cause serious injury or death if splashed in the eyes or on skin, inhaled, or
swallowed.
• Read Safety Data Sheet (SDS) to know the specific hazards of the fluids you are using.
• Store hazardous fluid in approved containers, and dispose of it according to applicable guidelines.
3A3453H
EQUIPMENT HAZARD
HAZARD
EQUIPMENT
HAZARD
Pressure Relief
Pressure
Relief Procedure
Relief
Procedure when you stop spraying/dispensing and before cleaning,
Procedure
MISUSE HAZARD
MISUSE
HAZARD
HAZARD
Technical Data
Data in all equipment manuals.
Technical
Data
PARTS HAZARD
PARTS
HAZARD
HAZARD
Pressure Relief
Pressure
Relief Procedure
Relief
Procedure and disconnect all power sources.
Procedure
OR FUMES
FUMES
OR
FUMES
WARNING
WARNING
WARNING
Pressure Relief
Relief Procedure
Procedure when equipment is not in use.
Pressure
Relief
Procedure
Warnings
Technical Data
Technical
Data in all
Data
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

E-flo dc 2000E-flo dc 3000E-flo dc 4000

Table of Contents