Graco E-Flo DC Series Instructions Manual page 27

Run Screen Screen 4 4 4
Run Run Screen
This screen displays fluid flow settings for the active
profile.
NOTE: Some fields are grayed out, depending on
NOTE: NOTE:
setup selections.
Figure 12 Run Screen 4
Run Run Run Screen Screen 4 4 4 Key Screen
Select the profile (1 to 4) from the menu.
Select the stop option
menu to stop the pump.
Displays the target pressure as selected
in Setup Screen 2, page
Figure 13 Run Screen 4, in Pressure Mode
Figure 14 Run Screen 4, in Flow Mode
3A3453H
Key Key
from the
30.
Run Screen Screen 5 5 5
Run Run Screen
This screen displays the current pressure readings of
transducers 1 and 2. Pressure can be displayed as
psi, bar, or MPa. See Setup Screen 18, page
Figure 15 Run Screen 5
Run Screen Run Run Screen Screen 5 5 5 Key
Displays the pressure of transducer 1.
Displays the pressure of transducer 2.
Displays the pressure difference
between transducer 1 and transducer 2.
Run Run Screens Run Screens 6–9 Screens 6–9 6–9
Run Screens 6–9 (single or x2 parent pump)
and 10–13 (x2 child pump) display a log of
the last 20 alarms, with date and time. The
currently active pump is displayed in a box at
the top left of the screen. For error codes, see
Error Code Troubleshooting, page
Figure 16 Run Screens 6–9 (Screen 6 shown)
Operation
42.
Key Key
46.
27